var












get-fans-468x60 Referral Banner

Tuesday, March 31, 2015

Valuable Tips For Laptop Screen Repair Houston

By Lelia Hall


For options with broken laptop display unit, you can easily attach this portable PC to an external monitor, buy a new one or even fix the screen. The best of this option is laptop screen repair Houston. While removing the broken display unit, don't be afraid, just make sure that you don't break anything in there and it's recommended you document every step you take during the repair process. These steps are very useful when it comes to putting everything back together.

You will have to take special notes on how the cables have been wired, the webcam as well as the antennas. The order of how you remove all those parts needs to be documented. You continue to remove specific screws and know where each one needs to go when the need arises. All the same, keep all the parts together as well as storing them in a safe place.

The display backlight keeps showing some flickers and afterwards shuts down after a few minutes of use and trying to start all over again does not come back at all. You can still see some faint images, and then you find out that the problem could be the inverter(the small board that supplies power to the backlight). This board cost around a hundred dollars, hence consider replacing it first. This may still not solve the problem, so finally consider checking the backlight.

The first step is getting the display unit bezel off. You will be required to disconnect the power supply plus remove the battery. With a lot of care, examine the bezel around the VDU. It's by removing the bezel that you can use the screws that hold the screen panel situated properly.

Now you will be required to replace the VDU. Just find the bezel screws and remove them. With a lot of care, carefully check the rubber cushions that cover the bezel to reveal all the screws holding the screen in place. It is required to remove and examine the current display unit prior ordering new one. Doing so, you can view what causes the problem directly from the VDU.

Even so, it is not dependent on the method use, but getting the bezel removed to access the screen. Then you will be required to remove the broken display panel. After exposing the VDU mounting bracket, you can smoothly remove the screen that secures the lid. It's recommended that you reset the display front side down where you can absolutely disconnect all its cables. Consider knowing the date of manufacturing as those made before 2010 has an LCD display with a fluorescent backlight at most times with two cables.

The third step concerns the installation of the brand new LCD. You will have to order brand new screws. When they arrive, make sure that they match the old ones. Think of checking if the dimensions, mounting brackets, as well as the connectors match, and then you are ready to go to the display unit to install. Begin by connecting the new display panel to the cable. Remember to carefully place the panel in the lid and secure it using the right screws.

Lastly, replace the faulty display unit using the same procedure as you did to remove the old one. After all is well with the new installation, you will need to power the laptop on. If the Laptop works well, you can go on to fix the bezel as well as the screw and don't forget to place it back on the cushions. You are good to go, but always engaging the services of experts in Houston is cost/time saving.




About the Author:



No comments:

Post a Comment

Thank You.

Hello, How are you doing? I am using this opportunity to inform you that the business that we both are working on before has been finally...